RDA-800

£180.00

Compact and easy to use, the RDA-800 is an RF dimmer for 0-10V, DSI and DALI controllable loads, including dimmable fluorescent ballasts and LED drivers.

Designed to fit in a cupboard or ceiling void, and connected in-line before the first fitting the module can control up to 800VA. You can choose the signal output mode via a connecting link.

Easy to program, the RDA800 stores the Room, House and Channel address, as well as 16 preset scene levels in non-volatile memory, and can be programmed using either an RF wall-plate or RCM/RCP RF wall-plate.

You can use any Rako Rakom device to control the RDA-800, including bridge interface units and wall plates.

It’s easy to install through using a mounting bracket and rising clamp terminals.

Description

Wireless
RDA-800
1-10V Flourescent Dimmer

Dimensions: 172x46x40mm
Input supply: 230V AC +/-10% 50Hz
Weight: 220g
Housing: UL V0 material
Climate range: Temperature +2C to +40C: Humidity +5% to 95% non-condensing
Connections: 3 way screw terminals for mains power 2 way screw terminals for ELV output
Protection: Over current protection: Voltage surge protection
Lload types: Selectable 0-10V: Controllable loads: DALI Controllable loads: DSI Controllable loads
Minimum load: N/A
Maximum load: 240V Switching: 800VA: Control output – max 25 devices
Terminal sizes: 4mm2
Standards: Emissions – EN61000-6-3 : 2001: Immunity – EN61000-6-1 : 2001
Communication: Rakom coded fm radio, 433.9MHz
Memory: Flash memory (non volatile)

London Office

45 Larkswood Road
Chingford, London, E4 9DS
Tel: 020 8524 6882
chris@mediacoms.co.uk

Hertfordshire Office

Unit I Suite 1, Peek Business Centre,
Woodside Industrial Estate, Bishops Stortford,
Hertfordshire, CM23 5RG
Tel: 01279 656983
info@mediacoms.co.uk

Essex Office

6 Newman Road,
Little Canfield Dunmow,
Essex, CM6 1GR
Tel: 01279 871777
info@mediacoms.co.uk