RMS-800

£109.20

Able to control up to 800VA of mains non-dimmable lighting loads, the RMS-800 is ideal for LEDs, extractor fans and non-dimmable fluorescents. If you add a weatherproof IP rated enclosure, it can also be used for exterior lighting control.

You can use any Rako Rakom device to control the RMS-800 wireless switcher, including bridge interface units and RCM wall plates.

With manual on/off control, easy set-up and 16 scene memory capacity, it can be fully integrated into Rako wired systems.

Installation is easy too, with mounting bracket and full rising clamp terminals.

Description

Wireless RMS-800
800VA switching unit

Dimensions: 138x46x40mm
Input supply: 230V AC +/-10% 50Hz
Weight: 205g
Housing: UL V0 material
Climate range: Temperature +2C to +40C: Humidity +5% to 95% non-condensing
Connections: 3 way screw terminals for mains power
Protection: Auto resetting over current protection: Auto thermal shutdown: Voltage surge protection
Load types: All non dimmable lighting loads e.g. extractor fans and water pumps.
Minimum load: N/A
Maximum load: 800VA
Terminal sizes: 4mm2
Standards Emissions – EN61000-6-3 : 2001: Immunity – EN61000-6-1 : 2001
Communication: Rakom coded fm radio, 433.9MHz
Memory: Flash memory (non volatile)

London Office

45 Larkswood Road
Chingford, London, E4 9DS
Tel: 020 8524 6882
chris@mediacoms.co.uk

Hertfordshire Office

Unit I Suite 1, Peek Business Centre,
Woodside Industrial Estate, Bishops Stortford,
Hertfordshire, CM23 5RG
Tel: 01279 656983
info@mediacoms.co.uk

Essex Office

6 Newman Road,
Little Canfield Dunmow,
Essex, CM6 1GR
Tel: 01279 871777
info@mediacoms.co.uk